Voice dialling
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so you do not need to record voice tags in
advance. The device creates a voice tag for the entries in
the contacts, and compares the spoken voice tag to it. The
voice recognition in the device adapts to the main user’s
voice to recognise the voice commands better.
The voice tag for a contact is the name that is saved for
the contact. To listen to the synthesised voice tag, select a
contact and
Options
>
Voice tag details
. Scroll to a
contact detail, and select
Options
>
Play voice tag
.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialling in all circumstances.
When you use voice dialling, the loudspeaker is in use.
Hold the device at a short distance away when you say the
voice tag.
1. To start voice dialling, in the home screen, press and
hold the right selection key. If a compatible headset
32
Ma
ke ca
lls
with the headset key is attached, press and hold the
headset key to start voice dialling.
2. A short tone sounds, and
Speak now
is displayed. Say
clearly the name that is saved for the contact.
3. The device plays a synthesised voice tag for the
recognised contact, and displays the name and
number. If you do not want to call that contact, select
another contact from the list of matches within 2.5
seconds, or, to cancel, select
Quit
.
If several numbers are saved for a name, the device selects
the default number, if defined. Otherwise, the device
selects the first available number in a contact card. You can
also say the name and telephone number type, such as
mobile or home.